Click on the Display adapters to expand the menu. Type devmgmt.msc in the text field. To update your Graphics Card you should first identify the Graphics Card model you are using, to get this information: Go to Start button > Run command.Here we'll walk you through breathing new life into your old Mac for not a lot of money. It remains Apple's last properly upgradeable Mac Mini, and even in 2020 can be a pretty handy little computer with the right bits inside. The 2012 Mac Mini held a special place in many hearts thanks to how easy it was to upgrade.
Convert HD videos, up to 1080p and 4K video. Convert more than 160 video and audio formats. Let you enjoy videos anywhere. 90 at Amazon Besides adding an SSD, the next best thing to do to give your old Mac Mini some additional legs for present-day computing is to add more RAM.The best Video Converter for Mac & PC users. Video Card S Pro 2.1 By Mac OS X El CapitanHere is your chance to check out the latest Mac OS X El Capitan on Mac Pro 1,1 and 2,1, upgrade and enjoy more years with you Mac Pro New storage: Kingston 480GB SSD ($56 at Amazon)Installed with the latest Mac OS X 10.11.6 El Capitan, modified for Mac Pro 20. Convert videos/audios on both Mac and PC. 5X Speed Promotion with GPU acceleration. Convert videos/audios to iPhone/iPad/iPod, and Galaxy devices. Magic cable: Mac Mini second drive kit ($15 at Amazon)The 2012 model remains to this day Apple's last, properly upgradeable Mac Mini. Right tools: ORIA Magnetic Screwdriver set ($18 at Amazon) A second hard drive: Seagate Firecuda 1TB ($63 at Amazon) The right cable: AmazonBasics miniDP to DP ($11 at Amazon) Blowing cobwebs: Canned air ($11 at Newegg) ![]() Reconnect the ribbon cable to the logic board. Turn the SSD over so it's upside down and the screws from step 15 are facing the edge of the Mac Mini.Using a business card again for support, slide the new SSD into place until the screws lock into place on the bracket inside the Mac Mini. Connect the same ribbon cable to the new SSD's SATA connectors. Detach the ribbon cable from the existing hard drive. Detach the Torx T8 screws from the existing hard drive.Attach those same screws to the left-hand side of your new SSD. Carefully detach the SATA cable for the hard drive from the logic board.Pull the existing hard drive clear of the Mac Mini. You could reuse the existing hard drive, but since it's over six years old, it makes much better sense to use a fresh one.You can use either a hard drive or an SSD, or as we have here, a Seagate Firecuda hybrid drive, not unlike the Fusion Drive Apple uses in some of its machines. How to add a second storage driveNot everyone will want to do this, but it is possible to install a second drive in the 2012 Mac Mini to maximize its storage potential. You'll be surprised at how clean the inside of a computer this old is, but it never hurts to clear it out while you're inside. Line the markings on the base up with the corresponding markings on the Mac Mini.One additional thing to do throughout this process is to use some canned air to blast out any dust. Slide out the retaining clip from the power supply.Turn the power socket 90-degrees anti-clockwise. Pull the logic board out of the rear of the case.Remove the two Torx T6 screws that hold the drive bracket and power supply in place. Disconnect the power supply cable from the logic board. Remove the final screw from the logic board with a Torx T6 screwdriver.Insert the logic board removal tool into the holes pictured.Gently pull the logic board away from the case. You will need to detach any remaining items from the logic board at this point, including the wireless shroud and the IR cable. Place the hard drive bracket back into the case and line up the fixing holes. Ensuring the ribbon cable is facing upwards, screw the new drive into the bracketwith the screws from your installation kit. Attach the rubber grommets from the install kit to the holes on the drive bracket.Attach the ribbon cable from the install kit to the new drive. Reinstalling macOSBesides adding an SSD, the next best thing to do to give your old Mac Mini some additional legs for present-day computing is to add more RAM.The 2012 Mac Mini uses 1600MHz DDR3 SODIMM modules and can accept up to 16GB across two slots. Follow steps 18-23 from the section above to insert the new main SSD and reassemble what remains of the Mac Mini.Once everything is back in place, and the Mac Mini is closed up, it's time to do a fresh install of macOS. Reverse the steps above to reinsert the logic board, all fixings, and connectors, including the new hard drive ribbon cable. Re-attach both by screwing the T6 screws back into the case. Line up the new RAM sticks and push gently into the slots. Pry apart the metal brackets around the current RAM sticks. Place your thumbs in the circular divots and twist the base clockwise. Ultimate performance will always be better on newer models. Pair it with a good monitorA new Mac is an expensive thing there's no denying that. If this is the case, the system won't post, so it's easy to spot. Remove one, reboot, and check About This Mac again to verify.By doing it a stick at a time, you can easily identify if you have any bad RAM. If not, you'll need to go back in and troubleshoot your installation one stick at a time. If it shows the amount of RAM you installed, all is well. Google instant messenger for macOur top equipment picksYou can pick and choose which of the upgrades you want to do, but here's a handy list of all our picks for the bits that went into our Mac Mini upgrade, along with the tools and accessories you need to install them. Don't overpay, though, for one that someone else has upgraded, when you can likely do the work yourself for less.Whether you buy or already have an old Mac Mini sat around doing nothing, with not a lot of money and a couple of hours of your time, you can turn it into a fantastic little computer to use in the present day.
0 Comments
Leave a Reply. |
AuthorKeith ArchivesCategories |